The Detector page
The Detector page from the Menu: connection and voltage, the active profile, and a page per topic for your detector's own settings.
Menu → Detector is where you pair detectors and change their settings from the phone. It has two segments: Configure and Devices.
Configure#
The header shows the connection state and, for a Valentine One, the car's voltage. Below it the profile card names the active detector profile; a Modified badge appears when you have changed a setting since the profile was applied. Tap the card to open the profiles list.
Then come the topic pages. Which ones you see depends on the detector:
| Detector | Pages |
|---|---|
| Valentine One | Sound & display (volume), Bands (X, K, Ka, laser and Ku), Photo radar (MRCD, MRCT, Gatso and more), Detector settings (mode, sensitivity, display), Custom sweeps, Health (auto mode by speed, voltage, temperature) |
| Uniden | Sound & display (volume, brightness, colours), Bands (bands, K scan, Ka segments, K-block), Detector settings (mode, voice, quiet ride, GPS) |
| Radenso DS1 | Sound & display (tones, display, colours), Bands (bands, sensitivity, filters), Detector settings (mode, GPS features, region) |
| Radenso Theia | Sound & display (audio, display, colours), Bands (sensitivity and alert detection), Detector settings (mode) |
Each setting is the detector's own, reworded in plain language with a short explanation. A change is sent to the detector over Bluetooth as soon as you make it.
When no detector is connected, Configure reads Not Connected with a Pair a Detector button.
Devices#
Saved detectors lists every detector you have paired. The top one is your primary; if it is unavailable the next one connects. Each has Connect / Disconnect, Rename and Forget detector. Pair a detector (or Add another detector) starts pairing; I don't have a detector switches to GPS-only alerts. The Jammers section appears when AL Priority is switched on under Experimental. See Pair a detector.
Alert tones and filtering are elsewhere#
The sounds the phone plays are under Menu → Settings → Alerts → Sound. Muting and filtering that the app does on top of the detector are under Menu → Settings → Detector → Alert filtering.