Valentine One
Pairing and using a Valentine One Gen2 with SpectreNav: arrows and bogey counter, bands and photo radar, custom sweeps, auto mode by speed, voltage and temperature.
What you get#
- The V1's arrows and bogey counter on the signal card, with strength on its 0 to 6 scale.
- Every band and photo-radar setting on the Detector page, custom sweeps, and mode switching.
- Health: auto mode by speed, the car's voltage and the detector's temperature.
- Because the V1 does not restart on a settings change, it is the one detector the app will write to automatically: automations and auto mode by speed are applied live.
Pair#
Power on the V1 Gen2; Bluetooth is on by default and it shows up as a name starting with V1. Menu → Detector → Devices → Pair a detector → Valentine One. See Pair a detector.
Detector page#
| Page | Settings |
|---|---|
| Sound & display | Volume, with a refresh for the detector's current levels |
| Bands | X, K, Ka, laser and Ku |
| Photo radar | MRCD, MRCT, Gatso and more |
| Detector settings | Mode (All Bogeys, Logic, Advanced Logic), sensitivity, display |
| Custom sweeps | Ka sweep ranges |
| Health | Auto mode by speed, voltage, temperature |
Auto mode by speed#
Under Alert filtering → Detector mode, Switch mode by speed moves between All Bogeys, Logic and Advanced Logic as your speed crosses a threshold, with a few mph of slack. The Health page shows which mode the app has set.
Mute#
Mute from the signal card, a button, a voice command or the V1's own mute button; the card follows the detector.
Troubleshooting#
See Supported detectors. A V1 that connects but shows no signals needs a Disconnect and Connect from Devices.